リン酸マンガン.jpg

​受付時間 9:00~18:00 
直通電話 090-6819-5609

mail:connection.fukui@gmail.com

リューブライト(リン酸マンガン)

Lubrite (manganese phosphate, zinc phosphate) details

Lubrite (manganese phosphate, zinc phosphate) is mainly used for large parts such as automobiles, machine parts, and building materials, mainly for the purpose of providing a coating base for steel materials, rust prevention, and plastic working lubrication. ..

This film is inferior in rust prevention to other plating treatments, but because it has excellent oil retention, it is possible to improve corrosion resistance by using rust prevention oil together.

The color tone of the obtained film is grayish black, the thickness is about 5 to 50 μm, and the finer and denser the crystal particles are, the better the corrosion resistance is. However, since there are many defects in the film such as pinholes, the corrosion resistance is other plating treatment. It is inferior to.

Processable size

Please contact us for details such as size and weight by preparing drawings.

リン酸皮膜絶縁破壊試験

平円板(25mm​径)で試験片を挟み直流及び交流(50サイクル)で行う。

リン酸マンガン皮膜、リン酸亜鉛皮膜断面観察画像

リン酸マンガン皮膜、リン酸亜鉛皮膜断面観察画像

Voices from customers after the construction of "Lu Bright"

The cylinder has been treated with lubright, but thanks to you, it is working well.

I can't say anything because I haven't checked the power before and after construction, but friction is definitely reduced.

I think it leads to an overall increase in torque.

Science_edited.jpg

​お電話でのお問い合わせはこちら
 

  090-6819-5690

 

​受付時間 9:00〜18:00

お問い合わせフォームはこちら

 

 
Working on Computer_edited.jpg
ご質問回答
  01 

Q. I would like to make a rough surface instead of roughening the surface with shot blast etc. Is it possible to make a rough surface by plating? The purpose is non-slip.

A. If it is a steel material, it is possible to express a rough surface because the film itself can form irregularities by applying our lubrite (manganese phosphate treatment).

  02 

Q. I would like to apply lubrite treatment (manganese phosphate treatment) to spring steel (SUP material). Is this possible?

A. Spring steel (SUP material) can be treated with lubelite treatment (manganese phosphate treatment).

If you send us a drawing or an illustration that shows the shape, we will confirm the size.

  03 

Q. What kind of processing is Parker processing?

A. It is also called Parker treatment (Parkerizing treatment), but the method of forming a phosphate film is collectively called Parker treatment (Parker rising treatment), but the same treatment as Lubrite is different only in the name. increase.
It is a chemical conversion treatment that chemically forms a phosphate film on the surface of metal. rice field.

 

  04 

Q. I would like to apply phosphate treatment to aluminum material. Is this possible?

A. Manganese phosphate cannot be treated, but zinc phosphate can be treated with aluminum materials.

If you send us a drawing or an illustration that shows the shape, we will confirm the size.

  05 

Q. I have a product that has been treated with phosphate, but is it possible to peel off the film because I want to do additional processing?

A.It is possible to remove the phosphate treatment (manganese phosphate, zinc phosphate) film.

  06 

Q. Is it possible to treat SS400 material (rolled steel material for general structure) with manganese phosphate (phosphate film)?

A. Manganese phosphate treatment is available for SS400 material (rolled steel material for general structure).

Please tell us the drawing that shows the shape and the quantity.

  07 

Q. Is it possible to treat S45C-D material (carbon steel) with Mn P acid coating?

A. Mn P acid film treatment = manganese phosphate (lubrite) treatment, but manganese phosphate treatment can be applied to carbon steel materials of S45C-D material (carbon content 0.42 to 0.48%).

  08 

Q. Is it possible to treat SUP material (spring steel) with Parker Rising (manganese phosphate)?

A. SUP material (spring steel) can be treated with manganese phosphate.

  09 

Q. Is it possible to treat S45C material (carbon steel for machine structure) with iron tetraoxide film treatment (black dyeing)?

A. S45C material (carbon steel for machine structure) can be treated with iron tetraoxide film (black dyeing).

Since it operates every day, if it is a size that can be accommodated, it can be accommodated in a short delivery time.

  10

Q. Is it possible to treat S45C (carbon steel) with a product size of Φ40 x 153 with lubrite (manganese phosphate)?

A. Lubrite (manganese phosphate treatment) is available for S45C carbon steel.

There is no problem in terms of size.

We will consider how to hold the product, so please send us the drawings etc. and we will confirm it.

  11 

Q. I would like the cast iron part of the air-cooled cylinder to be treated with lubelite. Is this possible?

Aluminum parts are attached around the cast iron, and the aluminum parts cannot be removed.

A. Only the cast iron part of the product where aluminum and cast iron are joined by a special method can be treated with lubrite.

  12   ​

Q. Is it possible to treat S45C (carbon steel) with a size of Φ592 x 65 with lubrite (manganese phosphate)?

A. Lubrite processing for Φ592 x 65 size S45C is available.

ロゴ.jpg

Connection Co., Ltd.

Please feel free to contact us for plating, coating, polishing, heat treatment, etc.

Consultations and quotations are free.

​4-202-5 Shizugaoka, Fukui City, Fukui Prefecture 910-3635 (Japan)

​Reception hours 9: 00-18: 00 

Direct phone 090-6819-5609

Science_edited.jpg